Welcome to WoGong!

News CenterPosition:News Center > News Details

How to detect shock absorber failure

【PubTime:2017-08-15 Admin:WoGong】

  In order to speed up the vibration of the frame and the body and improve the ride comfort and comfort of the car, the car suspension system is usually equipped with shock absorbers, widely used in the car is a two-way tube-type shock absorber.
  Shock absorber detection includes shock absorber performance test, shock absorber durability test, shock absorber double excitation test
  The various types of shock absorbers for power test, friction test, temperature characteristics test
  First, the car in the poor road conditions on the road after 10km parking, hand touch shock absorber shell, if not hot, indicating no resistance inside the shock absorber, shock absorber does not work. At this point, you can add the appropriate lubricants, and then test, if the shell heat, the shock absorber internal lack of oil, should add enough oil; otherwise, that shock absorber failure.
  Second, press the bumper, and then release, if the car has 2 to 3 jump, then the shock absorber work well.
  Third, when the car slowly driving and emergency braking, if the car vibration is more intense, indicating a shock absorber problems.
  Fourth, remove the shock absorber to its upright, and the lower end of the connection ring clamp on the vise, forced to pull the vibration pole several times, this time there should be a stable resistance, pull up (recovery) resistance should be greater than the If the resistance is unstable or no resistance, the shock absorber may be damaged or the parts of the valve may be damaged or replaced.
  Chongqin Wogong auto shock absorber Co.,Ltd.
  This article is organized by Chongqin Wogong auto shock absorber Co.,Ltd.


More +

Chongqin Wogong auto shock absorber Co.,Ltd. CopyRight